Eng
CNCatalog
search products
online service
TEL: +86-731-28679679
FAX: +86-731-28679979
Mobile: +86 139 0733 7319
E-mail: info@hvr-magnet.com
HEPMP series Lifting Magnet for Lifting Steel Plate
Home >>products >> Electro Permanent Lifting Magnet >>HEPMP series Lifting Magnet for Lifting Steel Plate
Related Products
HEPMP series Lifting Magnet for Lifting Steel Plate
Features
• EPMs suspended from fixed length spreader beam so that the maximum range of plates are covered.
• Double Mag Cycle - this ensures the safe lifting of the load.
• Power Control – Magnetic Power can be varied in 2 steps
• Magnets can be selectively switched according to the length of the plate being handled.
- Smaller Plates – Only internal magnets are switched ON.
- Larger Plates – All the magnets are switched ON.
• Safety Interlock Key – 2 buttons are needed to pressed simultaneously. This eliminates the chance of accidental operation.
• ADPREM – Accidental Demagnetization Preventions Mechanism. Disable the demagnetization cycle when carrying load.
• Lamp Block – Displays the systems present state.
• Radio Remote Control – Operates from a convenient distance all the functions i.e, the landing detection also available
Application
• For loading/ unloading plates from Railway Wagons/ trucks.
• For storing in Plate yards.
• For feeding plates onto a flame/ plasma cutting machine table, one at a time.
• Can be used with EOT/ Gantry/ Mobile Cranes etc
Main technical parameters
Note 1.The definition of rated lifting capacity for this series magnets: rated lifting capacity=The max. pull-off strength at 1.5 mm working air-gap/1.5. 2.The steel plate thickness is the minimum thickness of obtain max. lifting force. Not to say that below this thickness can not be lifted. 3.The series have strong magnetic model which the working air-gap is 2.2mm. Their overall dimensions will be same as the above list, but their rated lifting capacity(on 1.5mm working air-gap) is 1.5times of the above list. The strong magnetic.
Model
Rated lifting capacity(kg)
Magnetic pole number
Steel plate thickness (mm)
Max.pull-off strength(kg)
Overall dimension(mm)
weight(mm)
A
B
C
D
E
H
HEPMP-1000P50
1000
10
≥12
3750
490
220
86
360
16
408
65
HEPMP-1500P50
1500
15
≥12
5600
490
310
86
360
16
408
85
HEPMP-2000P50
2000
21
≥12
7800
670
310
86
360
20
456
110
HEPMP-3000P50
3000
32
≥12
11500
760
400
86
360
20
456
160
HEPMP-1000P70
1000
6
≥18
4300
370
260
101
--
16
425
70
HEPMP-1500P70
1500
8
≥18
5700
480
260
101
360
16
425
92
HEPMP-2000P70
2000
12
≥18
8500
700
260
101
360
20
470
125
HEPMP-3000P70
3000
18
≥18
12500
700
370
101
360
20
470
180
HEPMP-5000P70
5000
28
≥18
20000
810
480
101
450
25
645
270
Electro Permanent Lifting Magnet application photo